Micromax X591 Charging Problem Ways Jumper Solution.
In the below post, you have been shown how to fix the charging problem of Micromax X591 through by jumper. You check the image thoroughly, where does the track pass, check with a multimeter and in that way you can try to solve the problem.
 |
| Micromax-X591-Charging-Ways-Problem-Jumper-Solution |
The solution to the charging problem of Micromax X591 is given in this post. To solve the problem, first change the charging socket. If not resolved, check all the charging components one by one with a multimeter. If everything looks good then check the charging track ways. We have given jumper methods for the charging track in this post.
To solve the charging problem, the first thing you need to do is to check the PCB thoroughly.
If you find anything like dust or water damage anywhere on the PCB, then clean it. Please check and replace the charging socket first.
Please note that We'll either edit this solution or add a new one if it ever appears on this page in the future. So come back to this page at any time to stay up to date.
Note that Each repair solution posted here is tested by us prior to posting. However, We are not responsible if any damage occurs to your device during the repair process. So use the information available here at your own risk.
Micromax X591 Charging Ways, Charging Problem, Charging, Charging Fault
Micromax X591, Charging Jumpers, Not Charging, Charging, Charging Solution