Micromax A107 Charging Problem Solution Jumper Ways

Micromax A107 charging problem solution here. In this article, we explained in detail how to check and repair defects using solution in step by step techniques. Knowledge of how to fix these faults, the techniques in this article guide you to fix other phones as well. 

So this problem in this phone can be due to many reasons. In this problem, the charging track could be faulty, the charging ic or any charging related component could be defective. So to solve this problem first you need to check for faulty charging connector. replace the charging connector if faulty.

If you find the charging connector to be fine, then check the charging components and replace them if they are faulty. If everything is correct then after that you check the charging line with a multimeter, put a jumper if the line is broken. You can easily solve this problem by finding out the picture we have given below.

Micromax-a107-charging-way-jumper-solution

Here's how to fix the Micromax A107 charging mode issue:

1. Firstly, try using another working battery and charger and check again.

2. Check the charging connector for possible damage, clean it or replace it if necessary.

3. Also clean the charging connector terminal contact pad on the mobile board.

4. Check the all charging componants for shorting or open circuit.

5. Check the charging positive and negative line connection methods.

For more information and new tips and tricks on this problem please keep continuing to visit this page, if there are any new updates, then we will likely to update them. A related item is also given below, you can get more information about mobile phone.

Note:- Every solution published on our website has been thoroughly tested first by our expert team, but we still will not be responsible for any damage caused to your mobile phone. Use these repair solutions at your own risk, thank you.