If you are facing charging problem in Micromax Q336, then this post might be helpful for you. In this I have shown you how you can solve the charging problem of this phone through by jumper. First you change the charging connector, charger and battery and check again, if still the problem is not resolved then check the charging track ways, if the charging track is missing, then put the jumper in this way as you can see in the below picture, your problem will be 100% solved. Simply trace the points and make jumpers as shown in the picture. Track all these paths and components as shown in the picture below.
Here are the Micromax Q336 not charging Problem ways diagram Solutions. Please study these diagrams very carefully before you start the repairing.
Micromax Q336 Charging Ways Problem Repairing Diagrams Solution
• To solve the problem step by step, After opening the mobile first of all see if there is no water damage dust or carbon on the PCB, if it is then clean it.
• Try changing the charging socket, battery and charger, After this check all the components of the charging section. If any component is found to be faulty, then try changing it.
• If everything seems right to you, then after that check the charging track, use a multimeter for this, if the charging track break is found then After that, put the jumper as you can see in the image above.